Upgrade from Ondo PBX to Brekeke PBX does not work

ittiam · Brekeke Member Joined: 21 Dec 2005 Posts: 18

1. Brekeke Product Name and version:
From Ondo PBX 1.5.1.3 to Brekeke PBX 2.1.6.6

2. Java version:
jre1.6.0_03

3. OS type and the version:
Windows XP pro

4. UA (phone), gateway or other hardware/software involved:
None

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 1

6. Your problem:
I have an existing installation of Brekeke PBX 1.,5.1.3 on a PC. I tried to upgrade it to PBX 2.1.6.6 (I have an upgrade license). I followed the instructions at http://www.brekeke-sip.com/wiki/index.php?telepark.wiki=df1dd8ff in the section "If you have OnDO PBX installed by installer"

However, at step 15 when I reopen the admintool after upgrading brekeke, the webpage says "connecting to localhost" for a long time and then times out. It never opens the admintool succesfully.

What can I do?

Haddas · Brekeke Guru Joined: 17 Jan 2008 Posts: 170

you may need to restart the PC.

ittiam · Brekeke Member Joined: 21 Dec 2005 Posts: 18

Haddas, I've tried that (many times, in fact) and it doesn't help.

Any other ideas anyone?

Haddas · Brekeke Guru Joined: 17 Jan 2008 Posts: 170

Which port the Tomcat is working on?

is it "http://localhost:8080/pbx"?

BAuser · Brekeke Newbie Joined: 08 Jan 2009 Posts: 1

Isn't it port 28080 as default for win os? port 8080 is used in linux os as default.

Rgds.

voipwell.com · Posted: Sat Jan 10, 2009 9:25 pm Post subject:

So, you are going to http://localhost:28080/pbx.

What if you try http://localhost:28080 without the /pbx. do you get the tomcat screen?