SIP trunks with Nortel pbx

labonte.yves@hydro.qc.ca · Posted: Tue May 12, 2009 2:04 pm Post subject: SIP trunks with Nortel pbx

1. Brekeke Product Name and version: 2.2.7.8 evaluation

2. Java version: 6 update 13

3. OS type and the version: XP PRO

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : It's in a lab, I can put everything in the same subnet

6. Your problem:

Does anyone know if I can set up a SIP trunk with a pbx from my Brekeke SIP server ?

We have a Nortel pbx network, mostly at release 4.5

Harold · Posted: Fri May 15, 2009 1:43 am Post subject:

If your Nortel PBX supports SIP, it should work with Brekeke SIP Server.
Tey it!

labonte.yves@hydro.qc.ca · Posted: Fri May 15, 2009 6:26 am Post subject:

I guess the solution for my needs would be within the dial plan in the SIP server.

I wish I could get my hand on an example of that kind of programming.

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

how do you need BSS work in your test?
here are some samples
http://www.brekeke-sip.com/download/bss/bss_tutorial_dialplan_en.pdf

There are more in the bss document

labonte.yves@hydro.qc.ca · Posted: Tue May 19, 2009 7:23 am Post subject:

thank you hope, that pdf is definitlely going to help.

All I want to do is to be able to route calls from SIP registered phones on BSS to a Nortel pbx.

I guess I will have to create a SIP endpoint on the Nortel NRS and then play with the dial plans on both ends so that calls can flow between the two.

Sounds easy but it could take some time also.

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

use the dial plan to route call with prefix 9 to another IP

Matching Patterns

$request = ^INVITE
To = sip:9(.+)@

Deploy Patterns

To = sip:%1@destinationIP

labonte.yves@hydro.qc.ca · Posted: Wed May 20, 2009 8:51 am Post subject:

Trying to set this up with my Nortel pbx, do you have any idea of how to define that pbx ?

In my BSS, do I need to create a client ? a user ? can I use an IP adresse or do I need a URI ?

Thanks for any help.

Yves

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

i havenot used Nortel pbx before.

you can register a phone to BSS and dial 9+a_number,
then bss will send sip:a_number@destinationIP to destinationIP(Nortel pbx ip).
i think if a_number is a user on the Nortel pbx, the user will ring.