486 returned on all calls

ka2qhg · Brekeke Addict Joined: 21 Nov 2006 Posts: 34

1. Brekeke Product Name and version:
Brekeke PBX, Version 2.0.7.2 Pro Evaluation
ID: 00000000 , Users: 10 , Concurrent: 10

2. Java version:
1.5 update 14
3. OS type and the version:
Windows 2003 server with SP2

4. UA (phone), gateway or other hardware/software involved:
Callcentric , Linksys pap2

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 9

Your problem:

I have a test setup for Brekeke PBX, Version 2.0.7.2 Pro Evaluation It shows my pap2 as registered as ex1001,1002 and it also shows that my PBX is registered to Callcentric.

When I try to make a call, it rings one or two times and then returns busy (486). It doesn't make any difference if I change the sip configuration. I have tried the pap2 on another Brekeke Sip server and the unit works fine.

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

did the brekeke PBX register to Callcentric by ARS?
who returned 486 busy
did linksys pap2 register to Brekeke pbx? is there any pbx user created for each linksys number?

Laurie · Brekeke Master Guru Joined: 07 Jan 2008 Posts: 242

Larry,

Can you make a call between 1001 and 1002?

ka2qhg · Brekeke Addict Joined: 21 Nov 2006 Posts: 34

Both pap2 are registered to the Brekeke PBX. The Brekeke PBX is registered to Callcentric by ARS. I am unable to complete any calls. The call logs show 486 no matter what number I call. I have tried upper registration both on and off. The same with thru registration.

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

i think you can call between pap2?
set upper registration off
use ARS pattern-in to accept call from Callcentric to pbx extension, like
pattern-IN
[Matching patterns]
To: sip:the_number_pbx_register_to_Callcentric@

[Deploy patterns]
To: pbx_extension(such as 1001,1002)

use ARS pattern-out to send call to Callcentric, like
pattern-OUT
[Matching patterns]
To: sip:9(.+)@

[Deploy patterns]
To:sip:$1@Callcentric_IP

the calls with prefix 9 will be sent to Callcentric

ka2qhg · Brekeke Addict Joined: 21 Nov 2006 Posts: 34

I am now able to make calls from one pap2 to another. I had six extensions registred and they all are working.

I still have a problem with incoming calls from Callcentric, but outgoing calls are now working. I have a work around that I can use to route calls from my Callcentric DIDs to fixed extensions.

I think I can solve the rest of the problem, thank you again for all your help.