SIP Trunk Incoming cals

[juniper]

1. Brekeke Product Name and version: Brekeke SIP Server 2.4.3.9/286

2. Java version:1.5.0_09

3. OS type and the version: Windows 2003 R2 SP2 32 bit 5.2

4. UA (phone), gateway or other hardware/software involved: x-lite (direct SIP trunk form provider)

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:

we have got the below DID range from provider 18801495-18801498 (+3618801495....)
the outgoing calls are working fine but we have problem with incoming calls

we are using the below dial plan roles :


PMatching Patterns

$addr=91.83.81.243
$request=^INVITE
$getUri( To )=sip:\18801(.+)

Deploy Patterns

$target = localhost:15060 $auth = false $continue = true To = sip:%1

We have a user in brekeke PBX with name 495

we would get the calls on this extension when the 18801495 are called.

we have the following entry in the logs

sip:36709676434@91.83.82.243 sip:18801495@10.222.0.98:5060 00:00:00 Wed Mar 24 19:17:05 CET 2010 Wed Mar 24 19:17:05 CET 2010 Busy 486

if we throw all the calls directly to the extension 495 with the below rules the call gets to the x-lite client where the user 495 is logged on:

PMatching Patterns

$addr=91.83.81.243
$request=^INVITE
$getUri( To )=sip:(.+)

Deploy Patterns

$target = localhost:15060 $auth = false $continue = true To = sip:495

but in this case I can use only one extension.

How can I get wok all the dids with multiple users, extensions

Regards

Zoltán

[hope]

change your dial plan as below and click apply rule after change

Matching Patterns

$addr = 91.83.81.243 $request = ^INVITE

Deploy Patterns

$target = localhost:15060 $auth = false $transport = udp $b2bua = true

And create ARS pattern-in as
Matching Patterns
To: sip:18801(.+)@

Deploy Patterns
To: $1

If it doesnot work, capture packets of the call on your pbx server pc and check if the source ip of the INVITE is 91.83.82.243 and if To header is like sip:18801...@....
If not same, change dial plan $addr and ars To as what is shown in the packets