Author |
Message |
n2a1ce Brekeke Addict
Joined: 06 Dec 2010 Posts: 29
Location: Ukraine
|
Posted: Mon Dec 06, 2010 8:13 am Post subject: Help link brekeke PBX with audiocodes mp118 |
|
|
1. Brekeke Product Name and version: 2.4.7.3
2. Java version: 6. 22
3. OS type and the version: ubuntu 10.04
4. UA (phone), gateway or other hardware/software involved:
audiocodes mp118
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Hi, everyone, Hi Hope. Please help adjust incoming calls to my brekeke through audio codes mp118 <- gsm gateway. I can not understand that I have not correctly configured, the gateway or brekeke (ARS).
difficult, if not, please describe (A specific example) that should be spelled out at the gateway to fxo ports, and (concrete) for incoming ARS brekeke. Thanks in advance.
PS. sorry for my English. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
n2a1ce Brekeke Addict
Joined: 06 Dec 2010 Posts: 29
Location: Ukraine
|
Posted: Tue Dec 07, 2010 4:19 am Post subject: |
|
|
> have you check brekeke wiki about gateway setup?
Yes, I did set up
> what error response when making call between audiocodes and brekeke?
I do not know
hope, can you make ars for me, for incoming call??
Thanks in advance. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Dec 07, 2010 1:08 pm Post subject: |
|
|
ARS Pattern - IN
------------------------------------------
[Matching Patterns]
From:sip:(.+)@gw_IP
To: sip:(.+)@
[Deploy Patterns]
To: PBX_user
-------------------------------------------
ARS pattern-out is same as gateway wiki post
maybe also need dial plan
Matching Patterns | $request = ^INVITE $addr = gw_IP To = sip:(.+)@
| Deploy Patterns | $auth = false To = sip:%1@127.0.0.1:15060
|
|
|
Back to top |
|
n2a1ce Brekeke Addict
Joined: 06 Dec 2010 Posts: 29
Location: Ukraine
|
Posted: Wed Dec 08, 2010 12:47 am Post subject: |
|
|
Thank's, but don't calling. My Dial Plan:
Matching Patterns | $request = ^INVITE $addr = 192.168.1.10 (IP my AudioCodes) To = sip:(.+)@
| Deploy Patterns | $auth = false To = sip:%1@127.0.0.1:15060
|
My ARS
IN - 1 Matching patterns
from sip:(.+)@192.168.1.10 (IP my AudioCodes)
to sip:(.+)@ (all sip's ?!)
Deploy patterns
To 1021 (number of my private (registered) phone)
OUT - 1 Matching patterns
to sip:(093.+)@
User ^.+$
Deploy patterns
From sip:1021@192.168.1.3
To sip:004$1*@192.168.1.10:5060
Help me!!! Please! |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Wed Dec 08, 2010 10:38 am Post subject: |
|
|
IN - 1 Matching patterns
from: nothing set here
to sip:(.+)@ (all sip's ?!)
Deploy patterns
To 1021 (number of my private (registered) phone)
- is there pbx user created for 1021?
- try by removing setting in matching from just for testing
this setting will route all calls to ext 1021
it is better to use wireshark captured the packets and check From header sent from audiocodes
ARS OUT - 1 Matching patterns
to sip:(093.+)@
User ^.+$
Deploy patterns
From sip:1021@192.168.1.3
To sip:004$1@192.168.1.10
no * after 004$1
can you call from phone to audiocodes by the ars pattern-out?
with above ars out, if dial 0931111 then brekeke dial to audiocodes with number 0040931111, is it correct? |
|
Back to top |
|
n2a1ce Brekeke Addict
Joined: 06 Dec 2010 Posts: 29
Location: Ukraine
|
Posted: Tue Dec 14, 2010 6:19 am Post subject: |
|
|
thanks, it work! in my audiocodes don't wright namber on "automatic dialing" for fxo.
Hope, thanks!!! |
|
Back to top |
|
|