| Author |
Message |
n2a1ce
Brekeke Addict
Joined: 06 Dec 2010
Posts: 29
Location: Ukraine
|
 Posted: Fri Nov 25, 2011 5:07 am Post subject: how I can balancing my calls via itsp? |
 |
|
1. Brekeke Product Name and version: 2.4.7.3
2. Java version: 6. 22
3. OS type and the version: ubuntu 10.04
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem: how I can balancing my calls via itsp?
in my PBX there is connection to itsp, 4 sip-trunks
How can I balance the load on each channel equally
or Can I assign a certain amount of time on each for sip-trunk example: (1 hour peer day).
or choose sip-trunk to do is random, or as something in a different.
PS: priority (in ars) does not suit me, and it is also: http://wiki.brekeke.com/wiki/Brekeke-Load-Balancing
I have 1 itsp ip address!
thanks! |
|
| Back to top |
|
n2a1ce
Brekeke Addict
Joined: 06 Dec 2010
Posts: 29
Location: Ukraine
|
| Posted: Wed Nov 30, 2011 1:04 am Post subject: |
|
|
| PLEASE HELP! |
|
| Back to top |
|
hope
Brekeke Master Guru
Joined: 15 Jan 2008
Posts: 862
|
| Posted: Wed Nov 30, 2011 7:16 pm Post subject: |
|
|
| Quote: |
in my PBX there is connection to itsp, 4 sip-trunks |
please give more details about itsp and its sip trunk setting
are these 4 sip -trunks at itsp side?
how to differentiate these 4 sip trunks?
can the "max sessions" field in ARS rule meet your need?
with max sessions set, such as 4 in one pattern, if there are already 4 concurrent sessions through this pattern, pbx will look for another pattern to apply the next call.
check section 4.18 "ARS Outbound Route Failover" at http://www.brekeke-sip.com/download/bpbx/v2_x/bpbx_admin_basic_en.pdf |
|
| Back to top |
|
n2a1ce
Brekeke Addict
Joined: 06 Dec 2010
Posts: 29
Location: Ukraine
|
| Posted: Thu Dec 29, 2011 5:58 am Post subject: |
|
|
I want to spread the load on outgoing trunks.
let set a limit of 1 hour per day. and no more. or breaks between calls to make.
distribute the load. |
|
| Back to top |
|
hope
Brekeke Master Guru
Joined: 15 Jan 2008
Posts: 862
|
| Posted: Thu Dec 29, 2011 11:54 am Post subject: |
|
|
do you mean to set a time for each sip trunk for outbound calls?
like from 6am - 7am, all outbound calls will be sent to sip trunk1,
from 7am - 8am, all outbound calls will be sent to sip trunk2?
if so, dial plan rules can be used to check time like ex14 in dial plan tutorial http://www.brekeke-sip.com/download/bss/v2_x/bss_tutorial_dialplan_en.pdf
copy the dial plan rule used for outbound call currently and add $time in matching pattern and related destination in the deploy patterns and put new dial plan rule on top of other rules.
create similar rule for other sip trunk destination for different time. |
|
| Back to top |
|
n2a1ce
Brekeke Addict
Joined: 06 Dec 2010
Posts: 29
Location: Ukraine
|
| Posted: Sat Dec 31, 2011 1:53 am Post subject: |
|
|
| You can select a random selection of an outgoing trunk. or a specific number of minutes per day. or the intervals between calls? |
|
| Back to top |
|
n2a1ce
Brekeke Addict
Joined: 06 Dec 2010
Posts: 29
Location: Ukraine
|
| Posted: Fri Jan 06, 2012 6:47 am Post subject: |
|
|
| can you help me? please! |
|
| Back to top |
|
n2a1ce
Brekeke Addict
Joined: 06 Dec 2010
Posts: 29
Location: Ukraine
|
| Posted: Tue Jan 17, 2012 1:28 am Post subject: |
|
|
| hope, can you halp me???? |
|
| Back to top |
|
janP
Brekeke Master Guru
Joined: 25 Nov 2007
Posts: 336
|
| Posted: Wed Jan 18, 2012 10:44 am Post subject: |
|
|
i think you need to create own plugin to meet this requirement.
or you can ask brekeke to develop it. |
|
| Back to top |
|
|
