Dial plan problem

[bensly]

1. Brekeke Product Name and Version:

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Your problem:

i have deployed two dial plan below

1 NAT IP change $request = ^INVITE
$ifsrc = 59.90.xx.xx
$ifdst = 59.90.xx.xx


2 PBX forwarding
$request = ^INVITE
To = sip:(2.+)@ To = sip:%1@192.168.1.236:5060

if i make call to extension 220 PBX forwarding rule not considering by sip server. if i disable 1st rule then 2nd rule is working.

kindly let me know how to make active both rules.

and also please let me know, how to configure below in advance page insted of using dial plan.

$ifsrc = 59.90.xx.xx
$ifdst = 59.90.xx.xx

[hope]

try set $continue = true in first dial plan rule

you send call to local IP 192.168.1.236 but use global interface for connection?
and 5060 is not needed after 192.168.1.236

[bensly]

Hi,
Thanks.its working now.

Regards
Bensly

[Harold]

> and also please let me know, how to configure below in advance page
> insted of using dial plan.
>
> $ifsrc = 59.90.xx.xx
> $ifdst = 59.90.xx.xx


Just write them without "$" in the [Configuration]->[Advanced] page.
--------------------
ifsrc = 59.90.xx.xx
ifdst = 59.90.xx.xx
--------------------