| Author |
Message |
dstu
Brekeke Talented
Joined: 06 Feb 2006
Posts: 72
|
 Posted: Wed Oct 14, 2015 9:24 pm Post subject: 407 Proxy Authentication Required on BYE |
 |
|
1. Brekeke Product Name and Version:
Brekeke SIP Server , Version 3.2.4.3 Advanced
2. Java version:
1.7.0_40
3. OS type and the version:
Linux 3.2.0-4-686-pae (Debian)
4. UA (phone), gateway or other hardware/software involved:
Asterisk
5. Your problem:
I'm using The Brekeke proxy for through Registration. Asterisk registers to the Brekeke and I use the following rule to register to the ITSP (keyyo):
| Matching Patterns | $request = ^REGISTER
To = sip:(33175XXXXXX)@
|
| Deploy Patterns | To = sip:%1@keyyo.net
|
Then, I use this rule to route the incoming calls to another server in my LAN:
| Matching Patterns | $request = ^INVITE
$addr = xx.xxx.xx[1-4]..{1,3}
To = sip:(331.{8})@
|
| Deploy Patterns | To = sip:%1@ivr1
$session = failover sip:%1@ivr2 sip:%1@ivr3
|
The problem is that when the ITSP sends a call to the registered number, if my IVR is the one that ends the call, they reject the BYE and send a "407 Proxy Authentication Required" request.
In the next BYE, I send it, but the username we send is empty, so it's rejected again:
| Code: |
Proxy-Authorization: Digest username="",realm="keyyo.net",nonce="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",uri="sip:33177YYYYYYYY@ZZ.ZZ.ZZ.ZZ:5060",response="NNNNNNNNNNNNNNNNNNNNNN",algorithm=MD5,cnonce="SSSSSSS",qop=auth,nc=00000001.
|
How can I fix that?
Thanks,
David |
|
| Back to top |
|
Tata
Brekeke Master Guru
Joined: 27 Jan 2008
Posts: 223
|
| Posted: Thu Oct 15, 2015 11:40 am Post subject: |
|
|
> The problem is that when the ITSP sends a call to the registered number, if my IVR is the one that ends the call, they reject the BYE and send a "407 Proxy Authentication Required" request.
Are you using Asterisk as IVR?
Does it send BYE to the ITSP through the Brekeke?
And then the ITSP rejected the BYE with "407"? Is it correct? |
|
| Back to top |
|
Tata
Brekeke Master Guru
Joined: 27 Jan 2008
Posts: 223
|
| Posted: Thu Oct 15, 2015 11:41 am Post subject: |
|
|
> The problem is that when the ITSP sends a call to the registered number, if my IVR is the one that ends the call, they reject the BYE and send a "407 Proxy Authentication Required" request.
Are you using Asterisk as IVR?
Does it send BYE to the ITSP through the Brekeke?
And then the ITSP rejected the BYE with "407"? Is it correct? |
|
| Back to top |
|
dstu
Brekeke Talented
Joined: 06 Feb 2006
Posts: 72
|
| Posted: Fri Oct 16, 2015 6:52 am Post subject: |
|
|
| Tata wrote: |
Are you using Asterisk as IVR?
Does it send BYE to the ITSP through the Brekeke?
|
No. Asterisk sends the REGISTERs that the Brekeke forwards. The IVR is a separate machine that gets the incoming calls and sends the BYE.
| Tata wrote: |
And then the ITSP rejected the BYE with "407"? Is it correct? |
Yes. That's exactly what happens |
|
| Back to top |
|
Tata
Brekeke Master Guru
Joined: 27 Jan 2008
Posts: 223
|
| Posted: Fri Oct 16, 2015 10:12 am Post subject: |
|
|
Since the ITSP returned "407" to request a credential, the IVR should retries BYE with the credential.
but.. it seems the IVR doesn't know the username/password because the REGISTER was generated by the Asterisk.
so is it possible to forward a call through Asterisk?
I mean that Brekeke forwards ITSP's incoming call to the Asterisk (instead of the IVR directly) and then the Asterisk forwards the call to the IVR. If so, the Asterisk might handle "407".
Are you using the Asterisk for registration purpose only? |
|
| Back to top |
|
dstu
Brekeke Talented
Joined: 06 Feb 2006
Posts: 72
|
| Posted: Tue Oct 20, 2015 5:27 am Post subject: |
|
|
| Tata wrote: |
Since the ITSP returned "407" to request a credential, the IVR should retries BYE with the credential.
but.. it seems the IVR doesn't know the username/password because the REGISTER was generated by the Asterisk.
so is it possible to forward a call through Asterisk?
I mean that Brekeke forwards ITSP's incoming call to the Asterisk (instead of the IVR directly) and then the Asterisk forwards the call to the IVR. If so, the Asterisk might handle "407".
Are you using the Asterisk for registration purpose only? |
You're absolutely right. I tried that and then I also tried from the Asterisk to the ITSP directly. Regardless of the username I sent in the digest, it kept insisting on sending 407s to my BYEs.
I gave up on this provider. Their support was answering me things I told them. I think they do that on purpose to limit asterisk connections.
Thanks for your advice.
David |
|
| Back to top |
|
Tata
Brekeke Master Guru
Joined: 27 Jan 2008
Posts: 223
|
| Posted: Tue Oct 20, 2015 11:21 am Post subject: |
|
|
I think Asterisk supports BYE's authentication.
Does the Asterisk retries BYE with the Proxy-Authorization: or Authorization: header? |
|
| Back to top |
|
|
