Brekeke Forum Index » Brekeke PBX Forum

Post new topic   Reply to topic
Connectting Brekeke PBX to A Session Boarder Controller
Author Message
rsmithidgc
Brekeke Member


Joined: 22 Mar 2016
Posts: 16
Location: mobile al

PostPosted: Tue Mar 22, 2016 7:41 am    Post subject: Connectting Brekeke PBX to A Session Boarder Controller Reply with quote

1. Brekeke Product Name and Version:Brekeke PBX, Version 3.5.3.3

2. Java version:

3. OS type and the version:Windows server 2012

4. UA (phone), gateway or other hardware/software involved: Blox SBC

5. Your problem: i am having trouble getting brekeke to send and receive calls from and to the sbc.
Back to top
View user's profile
Tata
Brekeke Master Guru


Joined: 27 Jan 2008
Posts: 223

PostPosted: Tue Mar 22, 2016 9:15 am    Post subject: Reply with quote

Do you still have the problem if you don't use the SBC?
Back to top
View user's profile
rsmithidgc
Brekeke Member


Joined: 22 Mar 2016
Posts: 16
Location: mobile al

PostPosted: Mon Mar 28, 2016 7:44 am    Post subject: Reply with quote

sorry for the log delay i had to out of town for business.
i have gotten the sbc to register ext to pbx and make calls. now i need to get the brekeke to accept incoming calls from ITSP trough the sbc and Send calls to ITSP though the sbc. how can i do that using ars and dial plan
Back to top
View user's profile
janP
Brekeke Master Guru


Joined: 25 Nov 2007
Posts: 336

PostPosted: Mon Mar 28, 2016 9:51 am    Post subject: Reply with quote

Have you tried Brekeke PBX without the SBC?
Back to top
View user's profile
rsmithidgc
Brekeke Member


Joined: 22 Mar 2016
Posts: 16
Location: mobile al

PostPosted: Mon Mar 28, 2016 10:40 am    Post subject: Reply with quote

yes

i can setup to work with out the SBC but i would like to have it in line.
Back to top
View user's profile
janP
Brekeke Master Guru


Joined: 25 Nov 2007
Posts: 336

PostPosted: Mon Mar 28, 2016 12:07 pm    Post subject: Reply with quote

Does the SBC work as outbound proxy? so do you need to specify SBC's IP address as SIP destination?
Back to top
View user's profile
rsmithidgc
Brekeke Member


Joined: 22 Mar 2016
Posts: 16
Location: mobile al

PostPosted: Mon Mar 28, 2016 12:55 pm    Post subject: Reply with quote

yes it dose kinda.
i am useing Blox SBC
Back to top
View user's profile
janP
Brekeke Master Guru


Joined: 25 Nov 2007
Posts: 336

PostPosted: Mon Mar 28, 2016 1:15 pm    Post subject: Reply with quote

Have you made ARS for connecting to the ITSP ? Does it work without the SBC?
Back to top
View user's profile
rsmithidgc
Brekeke Member


Joined: 22 Mar 2016
Posts: 16
Location: mobile al

PostPosted: Tue Mar 29, 2016 1:48 pm    Post subject: Reply with quote

that is where i am now stuck is gettinng the ars config
Back to top
View user's profile
janP
Brekeke Master Guru


Joined: 25 Nov 2007
Posts: 336

PostPosted: Tue Mar 29, 2016 4:12 pm    Post subject: Reply with quote

Have you looked at this wiki page?
http://wiki.brekeke.com/wiki/Setup-for-Connecting-ITSP
Back to top
View user's profile
rsmithidgc
Brekeke Member


Joined: 22 Mar 2016
Posts: 16
Location: mobile al

PostPosted: Wed Mar 30, 2016 7:00 am    Post subject: Reply with quote

thank you janp i have looked at the wiki page
what i need is for the brekeke to accecpt calls comming from 123.23.1.1 with out auth then to send calls to same address when 9 is dialed
Back to top
View user's profile
janP
Brekeke Master Guru


Joined: 25 Nov 2007
Posts: 336

PostPosted: Wed Mar 30, 2016 11:04 am    Post subject: Reply with quote

For disabling the auth if an INVITE is sent from 123.23.1.1, add this DialPlan rule in the top of the DialPlan page.
Matching Patterns
$request = ^INVITE
$addr = 123.23.1.1$
Deploy Patterns
$auth = off
$continue = true


For sending a call to 123.23.1.1 when 9 is dialed, add ARS route in the PBX.
Back to top
View user's profile
rsmithidgc
Brekeke Member


Joined: 22 Mar 2016
Posts: 16
Location: mobile al

PostPosted: Wed Mar 30, 2016 12:45 pm    Post subject: Reply with quote

thank you
the problem was resolved with the help of the itsp.
Back to top
View user's profile
janP
Brekeke Master Guru


Joined: 25 Nov 2007
Posts: 336

PostPosted: Wed Mar 30, 2016 3:43 pm    Post subject: Reply with quote

great!
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    Brekeke Forum Index » Brekeke PBX Forum All times are GMT - 7 Hours
Page 1 of 1