Author |
Message |
stronggirl40 Brekeke Newbie
Joined: 02 Mar 2017 Posts: 2
Location: Indianapolis
|
Posted: Thu Mar 02, 2017 10:12 am Post subject: Cisco Call Manager - Help with Proxy Rule |
|
|
1. Brekeke Product Name and Version:
Brekeke SIP Server, Version 3.5.3.0, Advanced
2. Java version:
jre1.8.0_60
3. OS type and the version:
Windows 2008 R2 Enterprise
4. UA (phone), gateway or other hardware/software involved:
Cisco Call Manager, Cisco IP Phone 7942 Cisco-CUCM10.5
5. Your problem:
I would like to send a call from one device and have it ring the phone on the Call Manager. I have this as my dial plan. I am getting a 404 back from the Call Manager. Just wanted to make sure from the proxy side of the fence that I didn't need to add more to my rule. I also need to pass this call through and keep the call up for an undefined amount of time. The call is coming from my dialer and supposed to ring the phone on the Cisco Call Manager and keep an open connection during the time that I am active on the dialer.
Matching Patterns | $request = ^INVITE To = sip:(11070)@ $addr = 10.6.6.226|10.6.6.230
| Deploy Patterns | To = sip:%1@10.6.6.240
|
|
|
Back to top |
|
snuyzm Brekeke Talented
Joined: 11 Feb 2015 Posts: 97
|
Posted: Thu Mar 02, 2017 5:32 pm Post subject: |
|
|
Your DialPlan rule looks no problem.
What is the Call Manager's IP address? Is it 10.6.6.240?
Does the Call Manager have the extension 11070? |
|
Back to top |
|
stronggirl40 Brekeke Newbie
Joined: 02 Mar 2017 Posts: 2
Location: Indianapolis
|
Posted: Thu Mar 02, 2017 7:35 pm Post subject: |
|
|
We were able to get this issue resolved. Thank-you! |
|
Back to top |
|
snuyzm Brekeke Talented
Joined: 11 Feb 2015 Posts: 97
|
Posted: Thu Mar 02, 2017 9:16 pm Post subject: |
|
|
Nice! |
|
Back to top |
|
|