Authenticating a SIP Trunk

[tlsoren]

1. Brekeke Product Name and Version: BSS Standard 3.8.5.2

2. Java version: Version 8, Update 181

3. OS type and the version: Windows 2016 Standard

4. UA (phone), gateway or other hardware/software involved: Rauland Responder Telecenter U and Broadsoft Cloud Hosted PBX.

5. Your problem: We have a Rauland TelecenterU system that we are trying to get SIP Invites sent to the TelecenterU Campus Controllers from a Cloud Hosted PBX, running BroadSoft, with BSS as a proxy.

The Broadsoft vendor is telling me that they can setup a SIP Trunk to the BSS, but BSS will need to register to the Broadsoft using a password. I have not setup authentication on a SIP trunk or ever registered BSS to a third party before. Can you tell me if and how this can be done?

Here is the information that they have sent me to setup the registration:
UN: 91xxxxxxxxxx@xx.voip.xxxxxxxxx.com
PW: xxxxxxxxxxxx
SIP Server/Domain – xx.voip.xxxxxxxxx.com
SBC - 165.xx.xx.xxx

Thanks.

-Tom

[janP]

As a SIP proxy server, Brekeke SIP Server doesn't generate REGISTER by itself.

Does Telecenter U support SIP-REGISTER? and it supports authentication? If so the SIP Server can relay it to the Cloud Hosted PBX.
Otherwise, Brekeke PBX will be a solution because it has the feature.

[tlsoren]

Thank you for the reply.

I have added an evaluation edition of Brekeke BPX to try. Do you know where I would need as this this information for the Registration to the cloud PBx server? This is my first stab at PBX, and I am trying to get up to speed fast.

UN: 91xxxxxxxxxx@xx.voip.xxxxxxxxx.com
PW: xxxxxxxxxxxx
SIP Server/Domain – xx.voip.xxxxxxxxx.com
SBC - 165.xx.xx.xxx

[james]

You need to define an ARS at Brekeke PBX.
There is [Registration] settings under ARS.

FYI:
http://wiki.brekeke.com/wiki/Setup-for-Connecting-ITSP